CM Telephone +44 (0)1926 812066

Products / Temperature Generation

Icero+ - Portable ice-water 0ºC bath

For calibrating thermometers and referencing thermocouples to higher accuracies. These baths are particularly suited to onsite calibration checks as they are battery powered and portable.
Range 0ºC

  • Range 0ºC
  • Accuracy to 0.005ºC
  • Stability 0.001ºC over 8 hours
  • Uniformity 0.002ºC
Download
Datasheet
Make
Enquiry

Isotech Fast-CAL - Industrial Temperature Calibrator

Fast Cal is a one model solution that’s ideal for the validation of Washer Disinfectors, Steam Sterilisers and Autoclaves.

  • Low model -35ºC to +140ºC
  • Medium model 30ºC to +350ºC
  • High model 35ºC to +650ºC
  • Accuracies to ±0.15ºC (depending on model)
Download
Datasheet
Make
Enquiry

Isotech Isocal-6 - Portable Temperature Calibrators

The ISOCAL 6 is the only calibration system in the world to offer six calibration baths in one product range. It is a complete temperature calibration laboratory covering -45ºC to 250ºC (482ºF), in one simple easy-to-use package.
The ISOCAL 6 can calibrate temperature sensors absolutely or by comparison. It will calibrate contact and non-contact sensors including infrared thermometers, surface sensors, mercury in glass thermometers, as well as thermocouples, RTDs, and thermistors of any shape.

  • 6 calibrators in 1
  • Liquid baths, infrared, dryblock & ITS-90 fixed points all in one
  • Temperature range; Europa: -45 to 140°C, Venus: -35 to 140°C, Calisto: 30 to 250°C
  • 35mm Calibration Volume
  • ‹±0.3ºC Dry Block Accuracy
Download
Datasheet
Make
Enquiry

Isotech Hyperion 4936 - Portable Temperature Calibrator

The Hyperion has a large calibration volume; 65mm x 160mm deep, which makes it ideal for use as a portable liquid bath. Stirred liquid baths are suitable for temperature sensors of all types, sizes and shapes. Liquid Baths can provide smaller calibration uncertainties than dry blocks and when used with suitable reference thermometers, accuracies of up to 0.005°C can be achieved.

  • Multi-Function: Six Modes including Dry Block and Liquid Bath
  • 65mm Volume: Ideal Liquid Bath
  • Calibrate entire measurement loop – using a heat source rather
    than an electrical simulator, a test instrument and sensor can be
    calibrated as a system
Download
Datasheet
Make
Enquiry

Isotech Drago 4934 - Portable Temperature Calibrator

The Drago has a large calibration volume; 65mm x 160mm deep, which makes it an ideal for use as portable liquid baths. Stirred liquid baths are suitable for temperature sensors of all types, sizes and shapes. Liquid Baths can provide smaller calibration uncertainties than dry blocks and when used with suitable reference thermometers, accuracies of up to 0.005°C can be achieved.

  • Temperature range +30ºC to 125ºC
  • Display accuracy 0.15ºC
  • Stability Dry block/liquid bath (Advanced) ±0.005ºC
  • Insert size 65mm x 160mm
Download
Datasheet
Make
Enquiry

Isotech Europa 4520 - Portable Temperature Calibrator

The Europa will calibrate temperature probes from -45°C to 250°C with unrivalled flexibility. As a traditional Dry Block, several thermometers can be quickly calibrated.

  • Temperature range -45ºC to 140ºC
  • Stability ±0.01ºC
  • Standard insert 6 pockets 157mm deep
Download
Datasheet
Make
Enquiry

Isotech Venus 4951 - Portable Temperature Calibrator

The Venus will calibrate temperature probes from -45°C to 250°C with unrivalled flexibility. Used as a traditional dry block, several thermometers can be quickly calibrated.

  • Temperature range -35ºC to 140ºC
  • Stability ±0.01ºC
  • Standard insert 6 pockets 157mm deep
Download
Datasheet
Make
Enquiry

Isotech Calisto 4953 - PORTABLE TEMPERATURE CALIBRATOR

The Calisto will calibrate temperature probes from -45°C to 250°C with unrivalled flexibility. As a traditional Dry Block, several thermometers can be quickly calibrated.
Accessories are available to convert to a stirred liquid bath, for surface sensor calibration, to calibrate infrared thermometers and even to use as an ITS-90 Fixed Point System with calibration uncertainties as small as 0.0005°C. With excellent stability and distributed heating cooling zones for good uniformity these calibrators offer proven thermal performance.

  • Temperature range 30ºC to 250ºC
  • Stability ±0.02ºC
  • Standard insert 6 pockets 157mm deep
Download
Datasheet
Make
Enquiry

Isotech Jupiter 4852 - Portable Temperature Calibrator

The Jupiter Dry Block range offers industry-leading performance in an easy to use portable package – ideal for the calibration of thermocouples and platinum resistance thermometers. It has been designed for fast heating and cooling for convenient field use. For flexibility surface sensor and infrared thermometer accessories can be added.

  • Temperature range 35ºC to 660ºC
  • Stability ±0.02ºC @ 100ºC, ±0.03ºC @ 650ºC
  • Stability ±0.015ºC @ 100ºC, ±0.025ºC @ 650ºC (Advanced)
  • Standard insert 6 pockets 140mm deep
Download
Datasheet
Make
Enquiry

Contact Chamois Metrology