Pressure calibration test pumps & quick connectors from Additel and Martel include test pumps and pressure generators that are designed to enable the direct connection
of all pressure systems to be tested using adapters. Products include hand and pressure calibration test pumps, calibration pumps, filters, hose adaptors and fittings, manifolds.
The ADT 901 Low Pressure Calibration Test Pump is a hand operated pressure pump designed to generate pressures from -6 psi (-0.4 bar) to 6 psi (0.4 bar). A high-quality screw press is designed for fine pressure adjustment, with an adjustment resolution up to 0.1 Pa (0.001 mbar).
![]() Datasheet |
![]() Video |
![]() Enquiry |
The new Additel 959 Hydraulic Pressure Calibration Test Pump is a benchtop pressure pump designed to generate pressure to 40,000 psi (2,800 bar). This pump incorporates a dual-piston system which is ideal for filling large volume workload with the hand pump and providing smooth increase and decrease of pressure with the high pressure, fine adjust screw press. The 959 test pump incorporates an isolation valve which isolates the calibration volume from the check valve associated with the hand pump.
![]() Datasheet |
![]() Enquiry |
The 914A Pneumatic Pressure Calibration Test Pump is a hand operated pressure pump designed to generate pressure from 95% vacuum to 375psi (25bar). A high-quality screw press is designed for fine pressure adjustment, with an adjustment resolution up to10 Pa (0.1 mbar).
![]() Datasheet |
![]() Video |
![]() Enquiry |
The 912 Pneumatic Pressure Calibration Test Pump is a hand operated pressure pump designed to generate pressure from 95% vacuum to 60psi (4bar). A high-quality screw press is designed for fine pressure adjustment, with an adjustment resolution up to 0.1 Pa (0.001 mbar).
![]() Datasheet |
![]() Video |
![]() Enquiry |
The ADT 916A Pneumatic Pressure Calibration Test Pump is a hand operated pressure pump designed to generate pressure from 95% vacuum to 600psi (40bar). A high-quality screw press is designed for fine pressure adjustment, with an adjustment resolution up to 10 Pa (0.1 mbar). A specially designed shut-off valve makes the pressure as stable as possible during calibration.
![]() Datasheet |
![]() Video |
![]() Enquiry |
The ADT 917 Pneumatic Pressure Calibration Test Pump is a hand operated pressure pump designed to generate pressure from 95% vacuum to 1,000psi (70bar). A high-quality screw press is designed for fine pressure adjustment, with an adjustment resolution up to 10 Pa (0.1 mbar).
![]() Datasheet |
![]() Video |
![]() Enquiry |
The new Additel 960 Hydraulic Pressure Test Pump is a benchtop pressure pump designed to generate pressure to 60,000 psi (4,200 bar). This pump incorporates a dual-piston system which is ideal for filling large volume workload with the hand pump and providing smooth increase and decrease of pressure with the high pressure, fine adjust screw press. The 960 test pump incorporates an isolation valve which isolates the calibration volume from the check valve associated with the hand pump.
![]() |
![]() Enquiry |
The ADT 918 Pneumatic Pressure Calibration Test Pump is a hand operated pressure pump designed to generate pressure from 95% vacuum to 1,500psi (100bar). A high-quality screw press is designed for fine pressure adjustment, with an adjustment resolution up to 10 Pa (0.1 mbar).
![]() Datasheet |
![]() Video |
![]() Enquiry |
The ADT 919A High Pressure Pneumatic Calibration Test Pump is a hand operated pressure pump designed to generate pressure from 95% vacuum to 2,000psi (140bar). With a long lever, it just takes 30 seconds to reach 2,000 psi (140 bar).
![]() Datasheet |
![]() Video |
![]() App Note |
![]() Enquiry |
The ADT 920 High Pressure Pneumatic Calibration Test Pump is a hand operated pressure pump designed to generate pressure from 95% vacuum to 3,000psi (200bar). With a long lever, it just takes 40 seconds to reach 3,000 psi (200 bar).
![]() Datasheet |
![]() Video |
![]() App Note |
![]() Enquiry |
The ADT 925 Handheld Hydraulic Pressure Calibration Test Pump is a hand operated pressure pump designed to generate pressure from 85% vacuum to 6,000psi (400bar). With the patented screw press technology, the high pressure can be easily generated, as well as increased and decreased smoothly.
![]() Datasheet |
![]() Video |
![]() App Note |
![]() Enquiry |
The ADT 927 Hydraulic Pressure Calibration Test Pump is a hand operated pressure pump designed to generate pressure from 85% vacuum to 10,000 psi (700bar). With the patented screw press technology, high pressures can be easily generated, as well as increased and decreased smoothly.
![]() Datasheet |
![]() Video |
![]() App Note |
![]() Enquiry |
The ADT 928 large volume hydraulic high pressure calibration test pump is a hand operated pressure pump designed to generate pressure to 15,000 psi (1,000bar). This pump incorporates a dual-piston system which is ideal for filling large volume workload with the hand pump and providing smooth increase and decrease of pressure with the fine adjustment.
![]() Datasheet |
![]() Enquiry |
The ADT 936 Hydraulic High Pressure Calibration Test Pump is a hand operated pressure pump designed to generate pressure from 85% vacuum to 15,000 psi (1,000bar). With the patented screw press technology, high pressures can be easily generated, as well as increased and decreased smoothly.
![]() Datasheet |
![]() Video |
![]() Enquiry |
The ADT 937 Hydraulic High Pressure Calibration Pump is a hand operated pressure pump designed for calibrating pressure measuring instruments with phosphoric acid ester fluid and Skydrol oil in the range from 85% vacuum to 15,000 psi (1000bar).
![]() Datasheet |
![]() Video |
![]() Enquiry |
The ADT 938 Hydraulic High Pressure Calibration Pump is specially designed for calibrating oil-free pressure measuring instruments in the range of 85% vacuum to 15,000 psi (1,000 bar). All parts used in the pump have been carefully cleaned to remove oil.
![]() Datasheet |
![]() Video |
![]() Enquiry |
The ADT 946 Hydraulic Pressure Calibration Test Pump is a benchtop pressure pump designed to generate pressure to 15,000 psi (1,000 bar). This pump incorporates a dual-piston system which is ideal for filling large volume workload with the hand pump and providing smooth increase and decrease of pressure with the high pressure, fine adjust screw press.
![]() Datasheet |
![]() Video |
![]() Enquiry |
The ADT 959 Hydraulic Ultra-High Pressure Calibration Test Pump is a benchtop pressure pump designed to generate pressure to 40,000 psi (2,800 bar). This pump incorporates a dual-piston system which is ideal for filling large volume workload with the hand pump and providing a smooth method to increase and decrease pressure using the high pressure, fine adjust screw press.
![]() Datasheet |
![]() Video |
![]() Enquiry |
The Additel 100 series Hose Adapter Test Kits are designed to extend your pressure calibrations to a convenient location and to adapt from one pressure connection to another.
![]() Datasheet |
![]() Enquiry |
The Time Electronics 7198 pressure instrument adaptor kit is an extremely useful and practical kit, suitable for laboratories and test facilities in process plants. It contains a wide range of fittings, adaptors, connectors and hoses to allow connection to pressure instruments. The range of thread types and sizes allow virtually all pressure devices under test to be connected rapidly.
![]() Datasheet |
![]() Enquiry |
The Additel 100-FLT-600 is a pneumatic filter and liquid trap covering from -15 to 600 psi (0 to 40 bar). This filter is ideal for your pneumatic measurement or calibration applications and contains an easy to use drain valve for removing dirt, moisture or contaminates. The Additel 100-FLT-600 is designed for hydraulic filtering uo to 700 bar.
![]() Datasheet |
![]() Enquiry |
The Additel 12X series pressure manifolds allow connections without the use of wrenches or PTFE tape, thereby increasing productivity when using calibration pumps, pressure controllers, dead weight testers, or piston gauges.
![]() Datasheet |
![]() Enquiry |