 |
Telephone
+44 (0)1926 812066
    ![](https://www.chamois.net/wp-content/uploads/2016/02/youtube-2.png" "YouTube"){kind=small} 
|
|
Telephone
+44 (0)1926 812066
|
Temperature generation using portable temperature calibration equipment, thermometer calibration equipment and dry well calibrators from Isotech and Benrhos.
Offering fast, accurate, stable solutions for calibrating temperature probes.
Additel ADT 850 Laboratory Thermocouple Calibration Furnace is the most accurate, stable and versatile furnace available. The ADT850 horizontal furnace covers a range of 300 to 1200°C and is commonly used in a multitude of industries such as energy, calibration laboratories, aerospace and metallurgy to name a few. It is generally used by primary and secondary calibration laboratories to calibrate noble and base metal thermocouples with the lowest possible uncertainties.
 Download Datasheet |
 MakeEnquiry |
Additel ADT 875 Dry Well Calibrator series provides portability, ruggedness, and precision over a wide temperature range, combining excellent performance in stability, radial and axial uniformity and loading with speed.
The ADT875 Dry Well Calibrator series consists of three temperature ranges from –40°C to 660°C:
– Low temperature –40C° to 155°C (ADT875-155)
– Mid-temperature 33°C to 350°C (ADT875-350)
– High temperature 33°C to 660°C (ADT875-660)
Each unit has performance specifications related to the guidelines published in Euramet cg-13 specifying stability, radial and axial uniformity, loading, and hysteresis.
| Download Datasheet |
Make Enquiry |
 Hire Product |
Additel ADT 875/878 Thermocouple Calibration Furnaces redefine high temperature calibration/verification work. With an unmatched stability, uniformity and an optional on-board process calibrator, calibrating thermocouples has never been easier. With two separate units to choose from, the ADT875-1210 and ADT878-1210 furnaces include a patented multi-zone temperature control which provides a never before seen highly stable and uniform heat source to ensure the best possible results from a modest investment.
| Download Datasheet |
 WatchVideo |
Make Enquiry |
Additel ADT 878 Reference Dry Well Calibrators take temperature calibration to the next level. With three models to choose from, ranging from -40 to 700°C, there’s a perfect fit for every calibration need. The Process Calibrator option adds an external reference input, a two-channel readout for UUT’s and a full complement of capabilities to help with everything from measuring temperature sensors, to calibrating thermocouples, self-calibrating the reference well and configuring HART transmitters. Each unit comes with a large touchscreen display and dual-zone control as standard.
| Download Datasheet |
Make Enquiry |
Additel ADT 878 TPW Kit provides everything you need to utilize the ADT 878-160
Reference Dry Well as an intrinsic standard. The triple point value (0.01°C) is key to ITS-
90 temperature probe calibration work. Traditional methods take time and practice to
realize the triple point of water. Additel has now simplified this process with an automatic
TPW realization feature.
| Download Datasheet |
Make Enquiry |
The Hyperion has a large calibration volume; 65mm x 160mm deep, which makes it ideal for use as a portable liquid bath. Stirred liquid baths are suitable for temperature sensors of all types, sizes and shapes. Liquid Baths can provide smaller calibration uncertainties than dry blocks and when used with suitable reference thermometers, accuracies of up to 0.005°C can be achieved.
| Download Datasheet |
Make Enquiry |
Isotech Drago 4934 Temperature Calibrator is a portable device with a large calibration volume; 65mm x 160mm deep, which makes it ideal for use as portable liquid baths. Stirred liquid baths are suitable for temperature sensors of all types, sizes and shapes. Liquid Baths can provide smaller calibration uncertainties than dry blocks and when used with suitable reference thermometers, accuracies of up to 0.005°C can be achieved.
| Download Datasheet |
Make Enquiry |
Fast Cal is a one model solution that’s ideal for the validation of Washer Disinfectors, Steam Sterilisers and Autoclaves.
| Download Datasheet |
Make Enquiry |
The ISOCAL 6 is the only calibration system in the world to offer six calibration baths in one product range. It is a complete temperature calibration laboratory covering -45ºC to 250ºC (482ºF), in one simple easy-to-use package.
The ISOCAL 6 can calibrate temperature sensors absolutely or by comparison. It will calibrate contact and non-contact sensors including infrared thermometers, surface sensors, mercury in glass thermometers, as well as thermocouples, RTDs, and thermistors of any shape.
| Download Datasheet |
Make Enquiry |
Isotech Europa 4520 Temperature Calibrator is a portable device that will calibrate temperature probes from -45°C to 250°C with unrivalled flexibility. As a traditional Dry Block, several thermometers can be quickly calibrated.
| Download Datasheet |
Make Enquiry |
Isotech Venus 4951 Temperature Calibrator will calibrate temperature probes from -45°C to 250°C with unrivalled flexibility. Used as a traditional dry block, several thermometers can be quickly calibrated.
| Download Datasheet |
Make Enquiry |
Isotech Calisto 4953 Portable Temperature Calibrator that will calibrate temperature probes from -45°C to 250°C with unrivalled flexibility. As a traditional Dry Block, several thermometers can be quickly calibrated.
Accessories are available to convert to a stirred liquid bath, for surface sensor calibration, to calibrate infrared thermometers and even to use as an ITS-90 Fixed Point System with calibration uncertainties as small as 0.0005°C. With excellent stability and distributed heating cooling zones for good uniformity these calibrators offer proven thermal performance.
| Download Datasheet |
Make Enquiry |
Isotech Jupiter 4852 Portable Temperature Calibrator is ideal for the calibration of thermocouples and platinum resistance thermometers. Its delivers industry-leading performance in an easy to use portable package. It has been designed for fast heating and cooling for convenient field use. For flexibility surface sensor and infrared thermometer accessories can be added.
| Download Datasheet |
Make Enquiry |
Registered Office
Chamois Metrology Ltd,
Unit 8, The Centre, Holywell Business Park,
Northfield Road, Southam, Warwickshire CV47 0FP
Telephone +44 (0)1926 812066
Email info@chamois.net
