CM Telephone +44 (0)1926 812066

ATEX Certified Test Tools

The Additel, Fluke and Martel ranges of ATEX Certified Test Tools includes Ex pressure calibrators and modules, pressure test gauges and digital, multimeters that are rugged, powerful yet easy-to-use, for use in explosion endangered areas.

Additel 681-IS series - Digital Pressure Gauges

The Additel ADT681IS series digital pressure gauges are unmatched in performance and reliability. With advanced microprocessor technology and state-of-the-art silicon pressure sensors, the Additel ADT 681 IS series digital pressure gauges provide an accurate, reliable, and economic solution for a wide range of pressure applications. The ADT681-IS series is loaded with functionality and remarkably easy to use.

  • Pressure ranges to 36,000 psi (2500 bar)
  • 0.025%, 0.05%, 0.1% or 0.2% FS accuracy
  • % pressure indication with fan-shaped graph scale for visual reference
  • Fully temperature compensated accuracy from 14°F to 122°F (-10°C to 50°C)
  • Up to eleven selectable pressure units
  • Large, easy to read display with 5-digit resolution
  • Backlit display
Download Datasheet Make
Enquiry

Fluke 718 Ex - Ex Pressure Calibrator

The Fluke 718Ex pressure calibrator is a powerful, intrinsically safe, self-contained portable pressure calibrator for usage in explosion endangered areas. About a third of the size of comparable instruments and weighing just two pounds, this compact pressure calibrator is an ideal solution for calibrating transmitters, gauges and switches.

  • Ranges -830 mbar to 7 bar
  • Accuracy ±0.05% full scale
  • Range up to 200 bar using 700PEx external pressure modules
  • ATEX II 1G Ex ia IIC T4 Compliant
Download
Datasheet
Make
Enquiry

Fluke 700 Ex - Ex Pressure Modules

The 725Ex Intrinsically Safe Multifunction Process Calibrator is powerful yet easy-to-use. Combined with one of the (8) Fluke-700PEx pressure modules, the 725Ex is able to calibrate almost any process instrument likely to need service in an area where explosive gasses may be present.

  • Ranges 25 mbar to 200 bar
  • Gauge, Differential and Absolute ranges
  • For use with Fluke 718 Ex and 725 Ex calibrators
  • ATEX compliant
Download
Datasheet
Make
Enquiry

Fluke 700G Series - Digital Pressure Calibration Test Gauge

Portable, high-quality round pressure gauge calibrator for fast and accurate calibration test results

  • Nine Models ranging from 1 to 700 bar
  • High accuracy, 0.05% total measurement uncertainty for one year
  • Bright Backlit display for easy viewing
  • ATEX approval
Download
Datasheet
Make
Enquiry

Fluke 707Ex - Loop Calibrator

The 707Ex is fast one-handed tool for mA loop checks in Ex zones, an intrinsically safe loop calibrator for use in explosion endangered areas. The Fluke 707Ex is certified in accordance with the ATEX directive (Ex II 2 G Ex ia IIC T4) in Zones 1 and 2.

  • Measure, source and simulate mA
  • 24 V loop supply with simultaneous current measurement
  • Mains voltage input protection
  • ATEX compliant
Download
Datasheet
Make
Enquiry

Fluke 87v Ex - Digital Multimeter

The new Fluke 87V Ex has all the measurement and troubleshooting functions of the proven Fluke 87V. Unlike most other ATEX-certified tools, it can be used both inside and outside the hazardous zone (ATEX Zones 1 & 2) without compromising performance or compliance. So there’s no need to carry different tools for use inside or outside the hazardous zones. It also has a built-in thermometer with TC probe, further reducing technicians’ tool counts.

  • True RMS voltage and current, (87V, 87V Ex)
  • Bandwidth 5 KHz (83V), 20 KHz (87V, 87V Ex)
  • Large display with analog bargraph and backlight
  • ATEX Compliant (87V Ex)
Download
Datasheet
Make
Enquiry

Contact Chamois Metrology