Telephone +44 (0)1926 812066  

Process Meters

Designed to reduce measurement time while increasing measurement accuracy, Fluke process meters, digital multimeters, process clamp meters, and Martel current loop calibrators provide noise-free, reliable results.

Fluke 787/789 - Process Meters

The 787/789 Process Meter is a DMM and Loop Calibrator in one rugged, handheld tool.
The 789 with its built-in 24 V loop supply reduces the need for taking a separate power supply when doing offline transmitter testing.

  • Precision 1000 V, 440mA True RMS Multimeter
  • DC current source and Loop Calibrator
  • Simultaneous mA and percentage scale readout
  • HART mode setting with loop power and built-in 250 ohm resistor (789)
Download
Datasheet		 Make
Enquiry

Fluke 80 Series V - Digital Multimeters

Fluke 80 Series V Digital Multimeters deliver the accuracy and advanced troubleshooting capabilities you need to solve problems fast. Use its low pass filter function to measure voltage and frequency accurately on electrically ‘noisy’ equipment like adjustable speed motor drives. Use the peak capture function to detect intermittent problems and transients as fast as 250 micro seconds (µs).

  • True RMS voltage and current, (87V, 87V Ex)
  • Bandwidth 5 KHz (83V), 20 KHz (87V, 87V Ex)
  • Large display with analog bargraph and backlight
  • ATEX Compliant (87V Ex)
Download
Datasheet		 Make
Enquiry

Fluke 289 - Digital Multimeter

Fluke 289 Digital Multimeter is the next generation high performance industrial logging multimeter designed to solve complex problems in electronics, plant automation, power distribution, and electro-mechanical equipment. The ability to log data and review it graphically on-screen allows problems to be solved faster and minimize downtime.

  • Large built-in screen with 50000 count 1/4 VGA display
  • Backlit screen shows multiple measurements at the same time
  • Unique TrendCapture functions allow users to view and store comprehensive graphical data on signal fluctuations
  • Log multiple sessions or log data continuously for up to a time period of 200 hours
  • In-built help functions for making using the meter easier
  • LoZ volt function reduces the effects of ghost voltages on readings
Download
Datasheet		 Make
Enquiry

Fluke 771 mA - Process Clamp Meter

Fluke 771 mA Process Clamp Meter can measure mA signals without breaking the loop. The popular Fluke 771 mA Clamp Meter saves time by making fast, accurate measurements on 4-20 mA signal loops without breaking the circuit.

  • 0.2% accuracy
  • Resolution and sensitivity 0.01 mA
  • Detachable clamp with extention cable
  • Dual backlit display with both mA measurement and percent
    of 4 – 20 mA span
Download
Datasheet		 Make
Enquiry

Fluke 772 and 773 mA - Process Clamp Meters

Fluke 772 and 773 mA Clamp Meters deliver mA measurement without breaking the loop. They are designed to save you time, and money, by eliminating time wasting activities. Now you can troubleshoot and repair 4-20 mA loops without breaking the loop or bringing down the system.

  • Source, simulate and measure 4-20 mA signals
  • Simultaneously source and measure mA signals (773)
  • 24 V loop power supply
  • Automatically ramp and step change 4-20 mA output
Download
Datasheet		 Make
Enquiry

Fluke 345 - Power Quality Clamp Meter

Fluke 345 Power Quality Clamp Meter is the ideal meter for commissioning and troubleshooting modern electrical loads. With a bright colour display to analyze the harmonic spectrum, a low-pass filter to remove high frequency noise, and a high EMC immunity design, the Fluke 345 is ideal for measurements on switching loads such as variable frequency drives, electronic lighting and UPS systems.

  • Clamp-on measurement of ac current up to 1400 A rms and dc current up to
    2000 A without breaking the circuit
  • 600 V CAT IV power analyzer is rated for use at the service entrance
  • Clamp meter performs even with distorted waveforms present on electronic
    loads with low-pass filter
  • Identifies intermittent faults by logging any power quality parameter for
    minutes, or over a month, including harmonics
Download
Datasheet		 Make
Enquiry

Fluke 376 - RMS Clamp Meter with iflex

Fluke 376 Clamp Meter offers improved performance perfect for a wide range of current measurement situations. With true-rms ac voltage and current measurements, the Fluke 376 can read up to 1000 V and 1000 A in both ac and dc modes.

  • 1000 A ac and dc current measurement with fixed jaw
  • 2500 A ac current measurement with iFlexTM flexible current probe
  • 1000 V ac and dc voltage measurement
  • True-rms ac voltage andcurrent for accurate measurements on non-linear signals
  • Frequency measurement to 500 Hz with both jaw and iFlexTM
Download
Datasheet		 Make
Enquiry

Contact Chamois Metrology

Registered Office
Chamois Metrology Ltd,
Unit 8, The Centre, Holywell Business Park,
Northfield Road, Southam, Warwickshire CV47 0FP
Telephone +44 (0)1926 812066
Email info@chamois.net


Open location map

Calibration Service Terms and Conditions

Sale of Goods Terms & Conditions

Cookie policy

Customer feedback form